>> Effective gel-like floc matrix destruction and water seepage for enhancing waste activated sludge dewaterability under hybrid microwave-initiated Fe(II)-persulfate oxidation process
题名：Effective gel-like floc matrix destruction and water seepage for enhancing waste activated sludge dewaterability under hybrid microwave-initiated Fe(II)-persulfate oxidation process
来源：Chemosphere
发表年代：2019年
作者：Guangyin Zhen, Jianhui Wang, Xueqin Lu*, Lianghu Su, Xuefeng Zhu, Tao Zhou, Youcai Zhao
Abstract Chemical conditioning before mechanical dewatering is an indispensable step to enhance the waste activated sludge (WAS) dewaterability and solid-liquid separation. Feasibility of utilizing Fe(II)/S2O82- oxidation integrated with microwave irradiation (MW) in improving gel-like floc destruction, water seepage and WAS dewaterability was investigated. Comprehensive characterization of the treated WAS was conducted to explore the effects of MW on the catalyzing kinetics of Fe(II)/S2O82- oxidation and reveal the underlying dewatering principle. The results demonstrated that MW-Fe(II)/ Fe(II)/S2O82-eprocess was more cost-efficient, reagent-saving than single Fe(II)/ Fe(II)/S2O82- oxidation or MW irradiation in stimulating WAS dewaterability and the optimal conditions were 0.4/0.5 mmol-Fe(II)/ Fe(II)/S2O82- g-1-TS (total solids) and 500 W with 94.6% capillary suction time (CST) reduction within 120 s of conditioning. Thermal effect of MW reduced the activation energy of Fe(II)/S2O82- decomposition and stimulated the generation of more SO4- while athermal effect could create additional gel-network destruction and cell lysis, which reduced the water-binding energy and induced the seepage of more extracellular polymeric substances (EPS)-bound and cell water. Further analysis via fluorescence excitation-emission matrix combined with parallel factor analysis demonstrated that protein-like, humic- and fulvic-like substances in slime EPS (S-EPS) and loosely bound EPS (LB-EPS) together affected sludge dewaterability. Additionally, the hybrid process could further remove the released COD and ammonia, facilitating the subsequent advanced treatment.
